Slitting And Cut-To-Length Line
Wide Range of Production
Suitable for small wall thickness and more number of slitting strip（0.1-2.0mm）, as well as high steel grade with large thickness slitting strip from 5mm up to 25mm thick and min. 500mm up to 2200mm width.
Slitter and cut-to-length could be separately designed and operated and also could be designed and operated as a combined one with both of slitting and cutting into lengths functions.
The width tolerance of finished strip can be controlled within ±0.05mm.
It’s convenience to change the blade; Easy maintenance and lower operating cost.
Can be customized according to site space factors, raw materials, energy situation, product quality and capacity control requirements.
1600x12.0mm Slitting Line in The Philippines
HML’ slitting and cut-to-length line can realize two functions: first is to uncoiling the coil first, after leveling and longitudinally slitting then rolled into a narrow strip. Secondly, the steel strip is leveled precisely, then fixed length, cross shear and stacking. The production range is: material width: 120-2200mm, thickness: 1.0-25.0mm.
This production line is one of the main products of our company, which is independently designed and developed by our company on the basis of synthesizing many advanced mechanisms and techniques of the same type of machines at home and abroad. The unit is controlled by PLC.
It not only could be separately served as independent mill line but also could be combined into one mill line with slitting first and secondly cut-to-length.
1800×14mm Slitting Line In China
2200×16mm Slitting Line In China
Low carbon steel and alloy s
CUT-TO LENGTH LINE