List
Square and Round Down Spout Downpipe cold roll forming machine 
  • DESCRIPTION

1-21120PU511407.png

1.Product Details :
Down Pipe Rain Spout Cold Roll Forimg Machine can bend the roll formed pipe ,and let the drainpipe and the bending connect to be the whole . The product after foll forming has long working time than the tranditional ppc pipe and not aging . It can make the project more integrate , and help to enhance the image of the all project .
Water gutter cold roll forming machine is composed of Uncoiler , the feed leading table , the main machine , the formation cutting device , hydraulic system , control system and the end product bracket .
2.Main prarameters of Down spout/downpipe machine :
Parameters of raw material :

Material

Thickness

ID

Yield Strength

Q235; GI&PPGI&Galvalume, Aluminum & copper

0.4--0.7mm

508mm

235Mpa

Decoiling ---Roll Forming ---Hydraulic cutting- --Collecting table
Photo:


Square and Round Down Spout Downpipe cold roll forming machine (图2)

Square and Round Down Spout Downpipe cold roll forming machine (图3)

Square and Round Down Spout Downpipe cold roll forming machine (图4)

3.Technology parameters of Square & Round Down Spout Downpipe Cold Roll Forming Machine :
The weight of Aluminium PPGI Rain Water Gutter Roll Forming Machine is about 5.2tons .  The Total dimension of machine is :
8700mm(Length)x 600mm (width)x1200mm (height)

3.1Manual decoiler of Square & Round down spout downpipe Cold Roll Forming Machine:
Capacity of uncoiler :          5 ton
Expansion of segment :        Manual
Rotation of segment :          Manual
Number of segment :          4
Range of segment expansion : 480mm--520mm
Operation method :         By Manual
3.2Guiding system of Square & Round down spout downpipe Cold Roll Forming Machine:
To keep the material straight
Entrance and adjustable wheel : 2-rollers
3.3Main forming machine of Square & Round down spout downpipe Cold Roll Forming Machine:
Coil thickness :  0.35--0.7mm
Motor type : 3 phase asynchronous motor
Main motor power : 5.5kw+4kw(normal speed
Approx: 19 groups roller including correction rollers
Rollers :S45C with quenching treatment , shafts of rollers are tooled by grinding machine for two times ensure the precision of final product.
Shaft Dia. Of max shaft :Ø70mm ( hardening and tempering )
Transmission type : By 1 inch chain
3.4Hydrauic cutting of Square & Round down spout downpipe Cold Roll Forming Machine:
Material of blade: Cr12Mov, HRC58-62
Length measuring : Automatic encoder length measuring
Type of cutting : Cutting after forming : cut the sheet after roll forming to required length . No need to change mold for different sizes .
Cutting motion ; The main machien automatically stops and the cutting will take place . After the cutting , the main machine will automatically start again .
Power of motor :   3KW
3.5 Product support frame of Square & Round down spout downpipe Cold Roll Forming Machine size: 3m( length)x0.5m(width)