List
Square and Round Down Spout Downpipe cold roll forming machine
  • DESCRIPTION

1.Product Details :

Down Pipe Rain Spout Cold Roll Forimg Machine can bend the roll formed pipe ,and let the drainpipe and the bending connect to be the whole . The product after foll forming has long working time than the tranditional ppc pipe and not aging . It can make the project more integrate , and help to enhance the image of the all project .

Water gutter cold roll forming machine is composed of Uncoiler , the feed leading table , the main machine , the formation cutting device , hydraulic system , control system and the end product bracket .

2.Main prarameters of Down spout/downpipe machine :

Parameters of raw material :

Material

Thickness

ID

Yield Strength

Q235; GI&PPGI&Galvalume, Aluminum & copper

0.4--0.7mm

508mm

235Mpa

 

Decoiling ---Roll Forming ---Hydraulic cutting- --Collecting table 

1-211221101P61A.png1-211221101R2329.png1-211221101Q5113.png

3.Technology parameters of Square & Round Down Spout Downpipe Cold Roll Forming Machine :

The weight of Aluminium PPGI Rain Water Gutter Roll Forming Machine is about 5.2tons .  The Total dimension of machine is :

8700mm(Lengthx 600mm (width)x1200mm (height)

 

3.1 Manual decoiler of Square & Round down spout downpipe Cold Roll Forming Machine:

Capacity of uncoiler :          5 ton

Expansion of segment :        Manual

Rotation of segment :          Manual

Number of segment :          4

Range of segment expansion : 480mm--520mm

Operation method :         By Manual

3.2 Guiding system of Square & Round down spout downpipe Cold Roll Forming Machine:

To keep the material straight

Entrance and adjustable wheel : 2-rollers

3.3 Main forming machine of Square & Round down spout downpipe Cold Roll Forming Machine:

Coil thickness :  0.35--0.7mm

Motor type : 3 phase asynchronous motor

Main motor power : 5.5kw+4kw(normal speed

Approx: 19 groups roller including correction rollers

Rollers :S45C with quenching treatment , shafts of rollers are tooled by grinding machine for two times ensure the precision of final product.

Shaft Dia. Of max shaft :Ø70mm ( hardening and tempering )

Transmission type : By 1 inch chain

3.4 Hydrauic cutting of Square & Round down spout downpipe Cold Roll Forming Machine:

Material of blade: Cr12Mov, HRC58-62

Length measuring : Automatic encoder length measuring

Type of cutting : Cutting after forming : cut the sheet after roll forming to required length . No need to change mold for different sizes .

Cutting motion The main machien automatically stops and the cutting will take place . After the cutting , the main machine will automatically start again .

Power of motor :   3KW

3.5 Product support frame of Square & Round down spout downpipe Cold Roll Forming Machine size: 3m( lengthx0.5m(width) 



Products
Hot news